Come installare il giunto del tubo ad alta pressione

(1) Rubber hose in moving or stationary, can not be overly bent, can not bend at the root, at least 1.5 times the diameter of the beginning of the bending;

(2) When the rubber hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;

(3) Try to avoid torsional deformation of rubber hose;

(4) hose as far as possible away from the thermal radiation component, it is necessary to fashion heat insulation board;

(5) The external damage of the rubber hose should be avoided, such as long-term friction on the surface of the same component in use;

(6) If the hose weight causes excessive deformation, there should be supporting parts.